FIBARO Smoke Sensor (Z-Wave)
FIBARO Smoke Sensor. Small, light-weight device with an aesthetically pleasing design. No need for wiring.
FIBARO Smoke Sensor (Z-Wave) is compatible with the following systems:
The FIBARO Smoke Sensor is a small, light-weight device with an aesthetically pleasing design and manufactured from robust materials. It uses temperature and photoelectric sensors to easily detect flaming or smouldering fires, the device is loaded with an acoustic alarm and RGB indicator. No need for unsightly wiring or complicated installation, the device is battery powered and simple to use. The sensor is also equipped with a built in electronic recording device, to better analyse incidents.
Looks grate, works great
The FIBARO Smoke Sensor is furnished with a highly polished grille, but its not just there to look great. In fact its one of the devices most important features, the electrochemically shaped perforations help guide even the smallest amount of smoke into the sensors inner chamber.
Smarter than it looks
Not all fires are the same and some materials burn without smoking, so the engineers at FIBARO included a temperature sensor. The device will detect rapid changes in temperature and read them as a threat.
Stronger than it looks
The FIBARO Smoke Sensor is manufactured from materials resistant to heats of up to 200 degrees celsius, threats and alerts are stored on the main controller and sensor’s memory for detailed analysis of incidents.
The heat of the moment
Just as fires are not all the same, room temperatures and uses can also vary. This can make determining if there is fire present in a room more difficult, and requires a subtle approach. To prevent false alarms the FIBARO Smoke Sensor’s sensitivity can be calibrated for the room it resides in. Where smoke and heat is unexpected such as a bedrooms, the sensitivity should be set to maximum to ensure a speedy response time. In rooms where heat and smoke is to be expected such as boiler rooms and kitchens, the sensitivity can be set lower to avoid being triggered.
In an emergency there is no time to waste and every second counts, get out of the building and let your system take care of the rest. Integrating the FIBARO Smoke Sensor into your networked devices allows the system to run complex scenes in the event of an alarmed event.
The FIBARO Smoke Sensor combined with the Home Center, gives you the ability to communicate with your sensors via voice control.
- Compatible with any Z-Wave or Z-Wave+ Controller
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption
- Extremely easy installation – simply install it in location prone to fire
- Battery powered
- 3 levels of sensors sensitivity
- Built-in casing opening detector
- Alarm is signalled by sound, visual indicator and Z-Wave control command
- Programmable excess temperature warning
- Automatic test performed every 10 seconds
- Dimensions: 65 x 65 x 28 mm
- Power Supply: 3.0V DC Battery
- Battery Type: CR123A/CR17345
- Operating Temperature: 0ºC to +55ºC
- Range : 50m (outdoors) 30m (indoors)
Manuals and Guides
Physical and Performance Attributes
|Dimensions (L x W x H)||65 × 65 × 28 mm|
|Operating Temperature||0ºC to +55ºC|
|Power Supply||3.0V DC Battery|
|Number of Batteries||1|