remotes are no longer available but can be copied:
Cloning Universal Garage and Gate Remote Control
The CLR4000 is a 4 channel remote that can copy any 433Mhz fixed code remote with DIP switches or fixed code remotes such as the TOP432S and TOP432NA.
These cloning remotes can only copy 433Mhz DIP switch remote controls. To check you remote open up the case to see if it has DIP switches as shown below.
The CLR4000 can asign upto 4 different channels to the 4 buttons. i.e. upto 4 garage door or gate receivers.
This remote is not compatible with rolling code or code hopping technologies.
Operating Distance: upto 80m
CLR4000 4 Button Mini Remote : £23+VAT
If you don't see the remote control you are looking for,
Call For Advice.
Brushed Metal Casing
Plastic Button Protector
Simple 4 Step Programming Instructions
1. Clear memory and prepare for programming - Hold down buttons 1 and 2 until the blue LED fashes - this takes around 20 seconds.
2. Place the original and the clone remote close together.
3. Press the button to be programmed on both remotes and hold until LED fashes steadily on the clone remote.
4. Programming is complete - Repeat steps 2-4 to program extra buttons.
We can supply a cloning remote that can copy your existing
433MHz Ducati, Elber or Rondy remote Control.
may vary. LR23A
Alkaline battery £1.99+vat