Aprimatic TR2 Transmitter
Two Channel Keyfob Remote

For control of up to two Aprimatic receivers

Dimensions: 73mm x 42mm x 20mm
Frequency: 433.92Mhz 
Power: LR23A battery included

Programming:

To Start programming you must be near the countrol panel of your gate automation system.

1. Press ALL the buttons on a pre-programmed remote and hold until the RECEIVER makes a continuous beeping sound (beeping last a maximum of 30 seconds with in which the new remote must be saved)
2. Press ALL the buttons on the NEW remote control at the same time. The sound will stop for a moment (approx. 1.5 secs) and then start again. Release the Buttons.
3. Press any button on the NEW remote control. The sound must stop for a moment (approx. 1.5 secs) and then start again.
   
   Repeat process to add new remotes.