Remote Control / Radio Equipment

How do radio transmiters / recievers work?

Radio Transmitters & Receivers function via sending data over radio waves. The most common frequencies these operate on currently in the gate and garage door industry are 433Mhz and 868Mhz. However these frequencies have varied over the years, so it is important you check which your remote operates on and be sure that the model of remote is suitable for the receiver that it is intended to be used with.

Remotes and receivers signal data between them which is uniquely programmed by the manufacturers. This typically prevents remote controls from being inter-compatible with other manufacturers devices. If you see a remote that operates on the same frequency, this does not necessarily mean they will be compatible / suitable for your radio receiver.

For more information or advice, please contact our friendly Technical Sales Team on 01384 569942 or email via Technical@Easygates.co.uk

Remote control transmitter opening a garage door

Filter Products

Search

Manufacturer

Showing 1–12 of 28 results

1 x RX1 Receiver and 3 x Remotes

RX1 Universal Receiver and Remote Kit

£60.00£156.00

Universal receiver kit for use with garage door openers. Replaces discontinued remote controls with our smaller remotes.

Quick & easy to install with colour-coded, pre-wired connections.

More Info...
Select options
41F-1Z-C2-24 24V DIN Rail Relay Module

41F-1Z-C2-12 – 12V Relay DIN Rail

£19.80

NOTE – The 12V Relay DIN Rail (24v Available) is a suitable alternative to the –> 8 PIN RELAY – 24VAC/10A Technical Ambient Temperature: -40℃ to 70℃ Rated Current: 6A (Per Pole) Dielectric Strength Min: 5000Vac (Between Input & Output) Retainer: Self-Contained Marker: 41F-M1 Module: Self-Contained Jumper: 41F-J1 Available Separator: 41F-S Available Terminal Torque: 0.6Nm Wire Strip Length: 7mm Max Wire Range: 1 x 2.5 / 2 x…

More Info...
Add to basket
41F-1Z-C2-24 24V DIN Rail Relay Module

41F-1Z-C2-24 24V DIN Rail Relay Module

£19.80

DIN Rail Relay Module. Switches up to 250V 6Amp from 24V input. NO & NC output.

More Info...
Add to basket
Beninca ONE.2WB Receiver

Beninca ONE.2WB Receiver

£82.30

Beninca ONE.2WB 433.92 MHz 2 channel universal radio receiver with terminal board.

Can be used for any application requiring a radio control.

More Info...
Add to basket
BFT Clonix 2/128 Receiver

BFT Clonix 2/128 Receiver

£81.90

BFT branded two-channel receiver card (does not include container).

Using the cloning process by radio it is possible to quickly and easily replace / add transmitters to the receiver memory.

More Info...
Add to basket
BFT Clonix 2E/128 Receiver

BFT Clonix 2E/128 Receiver

£81.90

BFT branded two-channel receiver with container suitable for outdoor installation.

Using the cloning process by radio it is possible to quickly and easily replace / add transmitters to the receiver memory.

More Info...
Add to basket
CAME RE432 Receiver

CAME RE432 Receiver

£70.80

CAME 433.92 MHz bi-stable 2 channel AM universal radio receiver.

Works with CAME TOP / TAM series 40.685 MHz remote controls.

More Info...
Add to basket
DBR200 Versatile Relay

DBR200 Versatile Relay (12 – 28V AC/DC)

£21.60

Versatile Relay. 12 – 28V AC/DC Power Input.

2 x Volt-Free Outputs / Contacts. Double Pole Change-Over Contact.

More Info...
Add to basket

Dortech ACC64F – Variable Voltage 6 – 28V Relay PCB

£16.20

This relay control unit is automatically regulated and no control voltage set-up is needed. It is suitable for continuous operation. NOTE – The “on board” voltage regulator may get hot, which is normal. The level of heat is dependent on the input control voltage level. It has built in thermal overload protection. Specifications Input Control…

More Info...
Add to basket
Elmes DWB100HT 2 Channel Receiver With 2 Remotes

Elmes DWB100HS-HET 2 Channel Receiver With 2 Remotes

Elmes receiver and remote control bundle, includes 1 x two channel receiver (DWB100HR-HET) and 2 x two channel remote controls (DWB100HT).

Alternatively, we also supply the remotes on their own. For more information click here.

More Info...
Read more
Erone SEL2641R433-IP Receiver

Erone SEL2641R433-XPL Receiver

£81.60

Erone 433 MHz 2 channel stand-alone radio receiver with KeeLoq® rolling code.

Operates any device that can be activated via relay.

More Info...
Add to basket
FAAC XR2 868C Receiver

FAAC XR2 868C Receiver

£104.76

FAAC branded two-channel external receiver, supplied with an IP44 weather-resistant casing suitable for outdoor installation.

Complete with an integrated decoding system (DS, SLH, LC) known as OMNIDEC.

More Info...
Add to basket