Note: The TRC with RED Buttons (as shown to the right) has now been dicontinued and replaced by the MITTO remote controls.
An early design of the MITTO remote transmitter, had a blue casing with yellow buttons as show to the right. Our MITTO remote is compatible with both of these remotes.
MITTO
02: 2 Button Remote: £24.50+VAT
MITTO 04: 4 Button Remote: £31+VAT
From
£24.50+VAT
BFT TEO 433.92Mhz Remote Control Keyfob
Description: 1,2
& 4 Button remotes with small yellow buttons.
TEO1: Discontinued use TEO2
TEO2: 2 Button Remote: £25+VAT
TEO4: 4 Button Remote: £32+VAT
If you
don't see the remote control you are looking for call For Advice.
From
£25+VAT
BFT VTM 315Mhz Remote Control Keyfob
Description: This remote has green buttons and comes in 1 and 2
button models. These remotes are programmed via DIP switches to a frequency of 315Mhz.
VTM2: 2 Button Remote Control: £42+VAT
PLEASE CALL
From
£30+VAT
BFT TM Remote Control Transmitters
Description: This remote has large orange rubber buttons and comes in
1,2 & 4 button models.
TM1: Discontinued
use TM2
TM2: 2 Button Remote Control: CALL
TM4: Discontinued
BFT TO Remote Control Transmitters
Description: This remote has blue rubber buttons and comes in 1,2 &
4 button models. TO1 TO2 TO4 : Discontinued
REPLACE WITH: Clonix Receiver and MITTO2 remote control
BFT CLONIX 2E:
The BFT CLONIX radio receiver is a powerful rolling code receiver
available as a plug in card for some BFT control panels, or as an
externally mounted unit in its own enclosure for hard wiring to any
control panel.
Coupled with the MITTO transmitters this radio system provides
excellent range and reliability for the control of gate automation or
door operators from any manufacturer.
The CLONIX 2 has two channels and the possibility of a latching
contact for hold open commands.
